1 PC 5" Wax-polishing Machine Random Orbital Air Palm Sander Polisher

Description

Paper Tape Dispenser Stand Tool
Description:
For handhol
d operation, suitable for aluminum, zinc and other metal alloy die-casting, stamping operations industry.
Features:
1, Random orbital action for high removal rate and a high quality finish.
2, Professional sander with unique ergonomic design.
3, Light weight, easy to control and you can operate by single hand.
Parameters:
Sanding pad size: 5" (125mm)
Free speed: 10,000 RPM
Air pressure: 90 P.S.I. (6.2Bar)
Air consumption: 0.4 m3/min
Load air consumption: 0.25 m3/min
Air inlet:1/4BSP
Air inlet thread: ZG1/4"
Tracheal smallest diameter: Ø6 mm
Acceptance pressure:0.63 MPa
Weight: 2.4 lbs (1.1kg)
Length: 6" (150mm)
Height: 3.7" (95mm)
Notes:
1, The inlet pressure at the tool inlet (not the air compressor air pressure) is generally 90PSI (0.63MPa). The pressure is too high or too low can also effect the performance and life.
2, The air intake must contain sufficient oil to allow sufficient lubrication of the dynamic part of the tool. (Check, the tool can be placed out of a white paper to see if there is oil discharge, the normal visible grease phenomenon)
3, Please do not remove any parts on the machine.
4, It is recommended to use the tube which inner diameter is 3/8 inch (9mm) to connect a high-power air compressor.
5, Compressor output air must pass through the oil-water separator to keep the air dry (humid air can easily lead to rusting of internal parts of the machine).
Item  include(239340):
1* Waxing polishing machine
On Mar-17-21 at 01:22:45 PDT, seller added the following information: