12V 24V Car Truck Electrical Circuit Power probe Tester Volt AVOmeter Diagnostic

Description

Store category
Sign Up Now !
You may also like
12V 24V Car Truck Electrical Circuit Power probe Tester Volt AVOmeter Diagnostic
Product Description
KM10 Car Circuit Tester Power Probe Basic Description
---Kzyee KM10 Power Probe super electrical probe diagnostic tool supports 12V and 24V electrical systems.
---Built-in voltage & polarity, continuity, Trailer Lights and Connections as well as signal circuit testing. it can quickly and accurately find trouble spot.
---Activating components in the vehicle or W/Ground, reading voltage display red/green polarity LED, tracing ,locating short circuits, bad ground contacts.
KM10 Circuit Tester Key Features
1.Highly reliable and extremely easy to use with 6m long strong cable
2.Built-in flashlight enables you to work in the dark
3.LED screen allows you to read voltage, current and resistance at the fingertip
4.With 6 Meter long electronic cable, convenient to test from the front to the rear of the car
5.Test mode contain AV Voltage, DC Voltage, Current Resistance, LED, including most car circuit test system
6.Including Cigarette Lighter adapter, battery test clips, easy to get battery supply from the car
7.Circuit Breaker Protection: Ability to Power Up Components. Automatically shut-off if current exceeds 5 Amperes, it design to protect an electrical circuit from damage caused by over-current, typically resulting from an overload or short circuit.
Warm Note:
This probe is very sharp on the pointed end, easily to get hurt. Better to be more careful when performing
KM10 Power Probe Functions
1. Perform these functions: power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
2. Read the AVO meter, voltage, current, and resistance easily.
3. Press the power switch lightly and get the instant heat ground lead to energize the electrical components, such as the cooling fan, relay etc.
4. Activate the components by using the hot wire and ground lead simultaneously.
5. Determine the positive, negative and open circuit quickly.
6. Test the bad ground contacts quickly, follow and locate short circuits without wasting the fuse.
7. Test the continuity of the power switch, relay and diode quickly.
8. Protect the tool from overload through the inner circuit breaker.
9. Allow you to work in the dark area by using the built-in head light.
10. Operate the tool without looking at the menu once users are familiar with the tone. Test along the vehicle by the long cable.
Work mode
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Model Button and cycling through each one. DC Voltage AC Voltage Resistance Diode
Voltage&Polarity Testing
Circuit Continuity Testing in Resistance mode
While the tool is in Resistance mode , using the probe tip with chases is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle's electrical system, When the probe tip is contacting a ground, the LCD will indicate "0.0Ω" and green LED will be on , A beep tone will sound.
Activating Components in Your Hand
Activating Components in The Vehicle
Testing Trailer Lights and Connections
Signal Circuit Testing
For example , you suspect there is a problem with your M.A.P ?
sensor circuit, then follow the procedure involved with testing this sensor.
*Set the tool in AC Voltage mode, using the probe tip with chassis ground or the auxiliary ground lead.
*Connect vacuum pump to MAP sensor
*Connect the probe tip to the MAP sensor , Positive terminal and observe the LCD readings which should be a sine wave in normal condition,
*Apply vacuum *Release vacuum and observe the LCD readings
Activating Components W/Ground
Product Image
Power Probe Specifications
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60C (32 to 140F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Package List
1 * PowerScan
1 * Rugged Blow Molded Case
1 * 20ft. Extension Cable
1 * Probe Tip
1 * Battery Hookup Clips
1 * Cigarette Lighter Adapter
1 * User Manual
Payment
Delivery details
About US
Customer Services
Contact us
Payment
-We accept All Payment method accepted by eBay.
-Payment must be made
within 7 days
. If you don't make the payment within 7 days, you may received a Non-payment message automatically sent from eBay.
Non-payment may result in an UPI (Unpaid Item), eBay will automatically close your account if you accumulate 4 UPI's total. Total amount due includes the final auction price plus S&H(Shipping and Handling).
-Your package will be out within
1 business
day after payment cleared.
Delivery details
1.Shipping address supplied by Paypal is acceptable.
2.
All parcels will be send via USPS/USPS priority/UPS/ Expedited Shipping
3. After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend).
4. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
5. Any further queries, please don't hesitate to email us. Thank you.
About US
We are a professional Authorized dealers of
AUTEL, ANCEL, AUTOPHIX, FOXWELL, KZYEE, LAUNCH, NEXAS, Vgate, OBDPROG,OBDSTAR etc
.
Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
- We supply many products on Automobile consumer.
There are OBDII cars / Light Trucks / Heavy Duty Truck's Diagnostic Tool, Mileage Correction & Key Program tool, Battery Tester, Fuel Injector Cleaner, Digital Circuit Tester, lgnition Spark Tester
and much more others products.
-We are eager to be your professional partner of automobile diagnostic tool.
-We support remote assistance by TeamViewer if you have any difficulty in software installation.
Customer Services
1. Please do not hesitate to leave us your
5 Star ★★★★★ of DSR positive feedback
if you are satisfaction with our products ,delivery or services .
2. If you
have Any Questions Or unsatisfied with your purchase, please email us first to get a better solution
before you leave a neutral or negative feedback
,
we work hard to make sure every customer 100% satisfied and resolve any problem for you.
Thank you for your kindness.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2. Please email us first
before giving negative feedback or opening a case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays） .
Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .