Autel Power Scan PS100 Car Diagnostic Circuit Tester Electrical Test 12V/24V Kit

Description

Autel Power Scan PS100 Car Diagnostic Circuit Tester Electrical Test 12V/24V Kit
Autel PowerScan PS100 Automatic Circuit Tester
PowerScan PS100 Features:
1. Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and
components activation
2. Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
3. With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans,relays, etc.
4. Simultaneously uses the hot lead and the ground lead to activate components right in your hand
5.Instantly identifies positive, negative and open circuits
6. Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
7. Instantly checks continuity of switches, relays and diodes
8. Circuit breaker protected
9. Built-in Flashlight enables you to work in the dark
10. Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
11. 20ft (extendable) cable provides excellent accessibility to test along the vehicle
12. Extremely easy to use and highly reliable
Autel PowerScan PS100 Work Mode:
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
DC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.
AC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.
Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
Tone On/Off
While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.
This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.
Electrical System Diagnostics:
Every Function You Need to Diagnose Vehicle Circuit is Included in Autel PS100 The automotive circuit tester Autel PS100 can work on all 6volt to 30-volt vehicle electrical systems.
After a simple hook-up of the test probe tool to the vehicle's battery, you can do following tests, test the polarity, read current, voltage and resistance, and find faulty wires or fuses in the vehicles without effort:
1. Voltage & Polarity Testing: Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
2. Continuity Testing: Test for continuity with its built-in auxiliary ground lead.
3. Component Testing & Trailer Light Testing: By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
4. Bad Ground Contacts Checking: Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
5. Short Circuits Locating: Follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
Provide Every User with Fast, Accurate, Agile Testing
Not only does the Autel vehicle circuit diagnostic tester PS100 has the power to complete every type of circuit test for vehicles, but it can also provide users with the most rapid and accurate testing outcomes. After numerous testing and verifications, we make sure that Autel PS100 can provide ready-to-read data without any delay. The LCD display will read the DC voltage with a resolution of 0.1 volts, even when you test low voltage, the numeral it reads can still be accurate.
What’s more, it has a built-in scope function, and you can use Autel circuit tester PS100 to probe sensors and get a visual scope pattern on the probe. With the advanced processor, waveforms like cam sensors, crank sensors, fuel injectors can be captured easily.
Circuit Breaker to Protect Overloaded
You are able to conduct full battery current to the tip of the probe when you press the switch forward.
The built-in circuit breaker is a nice feature to protect users, the test tool as well as the vehicle components, ensures their safety. Simply connect the extra ground lead to the tool and press the power switch forward and it will trip the circuit breaker. This will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from vehicle components, simple press the reset button and you are ready to power up again.
Head Light to Help You Work in Dark
PS100 has a headlight, which helps the technicians and mechanics to illuminate dark environments for better diagnoses. With this feature, there is no need for you to have another illuminating device when you want to diagnose circuits in corner areas or dim environments. Besides, Autel circuit tester PS100 also has a tone feature to make different sounds for mechanics to distinguish testing results in dark areas.
Autel PowerScan PS100 Specifications:
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power:12.0 or 24.0 V power provided via vehicle battery
Length\Width\Height:126mm(4.96").5mm(1.83")mm(1.38")
NW:0.105kg (0.23lb),GW: 0.726 kg(1.6lb)
Autel PowerScan PS100 Package including:
1 × PowerScan PS100
1 × Rugged blow molded case
1 × 20ft. extension cable
1 × Probe tip
1 × Battery hookup clips
1 × Cigarette lighter adapter
1 × User's Manual
Questions & Answers You Might Concern About Circuit Tester PS100
Question: How to Power the PS100?
Answer: The circuit test tool is powered via the vehicle battery. Connect the RED battery clamp to the POSITIVE terminal of the vehicles battery, and the BLACK clamp to the NEGATIVE terminal. When the tool is first connected to a battery (power source), it will sound a beep and the Head Lights will be on to illuminate the test area of the probe tip.
Question: Are the PowerScan Probe Tester computer and air bag safe?
Answer: The tool LED and LCD pull no more than 1 milliamp of current, therefore when using it as a test light or multimeter it is computer and air bag safe. When you press the switch forward, you are conducting full battery current to the tip of the probe. The built-in circuit breaker will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from computer components, simple press the reset button and you are ready to power up again.
Question: Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?
Answer: The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable that needs to be replaced on occasion. We have made it really simple to not only change it but also buy a new switch. The switch can be snapped out and replaced in seconds.
Payment
Delivery details
Return
About us
Contact us
Payment
1.We accept PayPal payment.
2.Please contact us if you need to use another method to pay.
3.Payment should be made within 7 days after bidding ends,but pls pay with 3 days ASAP,so that we can arranage ship at first time!
4.Otherwise a Unpaid Item case will be opened to you.
Delivery details
1.Items are generally shipped out within 24 hours after your payment has been cleared (Sat. & Sun. & Holiday excluded.)
2.We will arrange the shippment via USPS or FedEx. The delivery time usually takes 2-6 business days( Exclude public holiday and weekend), if you need the item urgently, please contact us for detail before purchase.
3.We are not responsible for wrong or undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
Return
1.We are authorize distributor, our all items are 100% original and Our devices have warranty,
2.12 months free repair for the devices.
3.3 months for the accessories.
4.Please contact us firstly when you need warranty service.
5.In case an item arrives faulty, please contact us in 30 days and keep it unused.
6.We will instruct you on how to return and get refund or replacement.
7.If after 30 days, or the item has been used, we have the right to decline your claim.
About us
1.We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.
2.We are authorized first class distributor of Autel and other brands,and more brands will be show in our store in near future.
3.You can follow our store and get the news of New Arrival.
Contact us
1.Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
2.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
3.We will reply within 24 business hours.
4.Business time: GMT8 (9:00-18:00) from Monday to Friday.