Autel PowerScan PS100 Auto Scan Electrical System Tester Diagnostic Service Tool

Description

Store category
Code Readers/Code Scanners
Diagnostic & Analysis System
TPMS Diagnostic & Service Tool
Other
Sign Up Now !
Autel Authorized Distributor
Freies Software-Update
100% Original Autel Genuine
You may also like
Autel PowerScan PS100 Electrical System Diagnostic Tool
Product Description
Autel PowerScan PS100 Generation Description:
Autel PowerScan PS100 is the
best electrical tester
for
reducing diagnostic time in all 6- to 30-volt vehicle electrical systems
. After a simple hook-up of the tool to the vehicle's battery, you can:
1.
Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
2.
Test for continuity with its built-in auxiliary ground lead.
3.
By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
4.
Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
5.
Follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
Top 3 Reasons to Get PowerScan PS100
1.Extremely easy to use and highly reliable
2.Built-in Flashlight enables you to work in the dark
3.Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
PowerScan PS100 Features：
1. Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
2. With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
3. Simultaneously uses the hot lead and the ground lead to activate components right in your hand
4. Instantly identifies positive, negative and open circuits
5. Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
6. Instantly checks continuity of switches, relays and diodes
7. Circuit breaker protected
8. Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
9. 20ft (extendable) cable provides excellent accessibility to test along the vehicle
Autel PowerScan PS100 Generation Description:
Autel PowerScan PS100 is the
best electrical tester
for
reducing diagnostic time in all 6- to 30-volt vehicle electrical systems
. After a simple hook-up of the tool to the vehicle's battery, you can:
1.
Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
2.
Test for continuity with its built-in auxiliary ground lead.
3.
By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
4.
Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
5.
Follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
Autel PowerScan PS100 Work Mode:
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
DC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.
AC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.
Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
Tone On/Off
While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.
This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.
Test Tool Know-how
:
1.Is the PowerScan Probe Tester computer and air bag safe?
The tool LED and LCD pull no more than 1 milliamp of current,therefore when using it as a test light or multimeter it is computer and airbag safe. However, pressing the power switch is a different story. When you press the switch forward, you are conducting full battery current to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the extra ground lead to the tool and press the power switch forward until it trips the circuit breaker.This will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from computer components, simple press the reset button and you are ready to power up again.
2.Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?
The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable that needs to be replaced on occasion. We have made it real simple to not only change it but also buy a new switch. The switch can be snapped out and replaced in seconds. You can buy switches from your Autel authorized tool supplier. The tool with the Rocker Switch slots makes it easy to replace a worn switch in the field without having to send it in for repair.
Autel PowerScan PS100 Specifications：
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Autel PowerScan PS100 Package List：
1 × PowerScan PS100
1 × Rugged Blow Molded Case
1 × 20ft. Extension Cable
1 × Probe Tip
1 × Battery Hookup Clips
1 × Cigarette Lighter Adapter
1 × User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within 3 days of auction closing.
When buying multiple items, please use the eBay shopping cart and check out once for all the items instead of paying for them individually.
When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
Please Note
Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding /buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample. In general, no custom duties and tax will be charged.
Delivery details
The default shipping method is via UPS or USPS which will take about 3-7 business Days in transmit for the hot season is coming. Please kindly be patiently wait for your order.
We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address.
Please make sure it’s correct and include phone number via PayPal when you make payment. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.
If you need to change your address, Please change it in PayPal first before you pay.
Items are generally shipped out within next 2 business days after payment has been verified. All items are shipped by Standard Registered Airmail.
Terms of sales
Buyer Guarantee
We assure you that we are a honest and super reliable seller on ebay, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. Please kindly contact us firstly if your purchasing is in trouble before leaving any bad feedback including neutral and negative feedback and leaving 3 stars or less stars to me on 4 criteria.
Return Policy
Please return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.
About us
WHO WE ARE?
We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness.
WHAT WE HAVE?
We have office in Shenzhen,China and 2 warehouses that are located in HongKong and US.We assure you not only good service but also to be ship as soon as possible.
Contact us
We are committed to your satisfaction after your purchase.
If you are not satisfied with your purchase in any way please give us an opportunity to try and make it right before leaving feedback.
We will answer your questions within 1 working days.
Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
Terms of sales
Feedback
On Jun-03-21 at 20:30:27 PDT, seller added the following information: