-40%

Autel PowerScan PS100 Electrical System Circuit Tester 12V/24V Car OBD2 Scanner

$ 46.96

Availability: 75 in stock
  • Vehicle Type: Heavy Duty/Commercial, Passenger Vehicle
  • UPC: 615517433816
  • Brand: Autel
  • Accessories: Carrying Case, Probes, User Guide
  • DC voltage range: 0-65V +1 digit
  • Resistance range: 0 – 200 KΩ
  • Condition: New
  • Volt: 6- to 30-volt vehicle electrical systems
  • Warranty: 1 Year
  • Display: TFT color display (160 x 128 dpi)
  • External Power: 12.0 or 24.0 V power provided via vehicle battery
  • Features: AVOmeter, test light, built-in flashlight, short circuit indicator, bad ground indicator, power injection, measurement, ground testing, polarity checks, components activation, Circuit breaker protected, Audio tone indicator, VOLTAGE & POLARITY TESTING, SIGNAL CIRCUIT TESTING, TESTING TRAILER LIGHTS AND CONNECTIONS, ACTIVATING COMPONENTS IN THE VEHICLE, ACTIVATING COMPONENTS W/GROUND, FOLLOWING & LOCATING SHORT CIRCUITS, DUTY CYCLE, LONG CABLE, Red/Green Polarity LED, Continuity Testing, Digital Display, Relay & Component Testing, Voltmeter
  • Model: Autel PowerScan PS100
  • Frequency response of tone pass through: 0Hz to 10Khz

    Description

    Store category
    Sign Up Now !
    You may also like
    Autel PowerScan PS100 Electrical System Circuit Tester 12V/24V Car OBD2 Scanner
    Product Description
    Autel PowerScan PS100
    The PowerScan Tool is the most revolutionary circuit tester to date. Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, the PowerScan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician looking for a fast and accurate solution to electrical system diagnostics.
    General Description:
    The tool is the best electrical tester for reducing diagnostic time in all
    6- to 30-volt vehicle electrical systems. After a simple hook-up of the
    tool to the vehicle's battery, you can:
    1.determine at a glance if a circuit is positive, negative, or open
    without having to reconnect clips from one battery pole to
    another.
    2.test for continuity with its built-in auxiliary ground lead.
    3.by depressing the power switch, conduct a positive or negative
    battery current to the probe tip for testing the function of an
    electrical component without the use of jumper wires.
    4.test for poor ground contacts instantly without performing
    voltage drop tests. The tool is also short-circuit protected; its
    internal circuit breaker will trip if it becomes overloaded.
    5.follow and locate short circuits without wasting fuses. The tool's
    long cable allows you to test along the entire length of the
    vehicle without constantly searching for suitable vehicle grounds.
    Features:
    1.Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
    2.Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
    3.With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
    4.Simultaneously uses the hot lead and the ground lead to activate components right in your hand
    5.Instantly identifies positive, negative and open circuits
    6.Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
    7.Instantly checks continuity of switches, relays and diodes
    8.Circuit breaker protected
    9.Built-in Flashlight enables you to work in the dark
    10.Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
    11.20ft (extendable) cable provides excellent accessibility to test along the vehicle
    12.Extremely easy to use and highly reliable
    Autel PowerScan PS100 Work Mode:
    There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
    DC Voltage
    While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.
    AC Voltage
    While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.
    Resistance
    While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
    Tone On/Off
    While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.
    This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.
    Test Tool Know-how
    1) Is the PowerScan Probe Tester computer and air bag safe?
    The tool LED and LCD pull no more than 1 milliamp of current, therefore when using it as a test light or multimeter it is computer and airbag safe. However, pressing the power switch is a different story. When you press the switch forward, you are conducting full battery current to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the extra ground lead to the tool and press the power switch forward until it trips the circuit breaker. This will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from computer components, simple press the reset button and you are ready to power up again.
    2) Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?
    The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable that needs to be replaced on occasion. We have made it real simple to not only change it but also buy a new switch. The switch can be snapped out and replaced in seconds. You can buy switches from your Autel authorized tool supplier. The tool with the Rocker Switch slots makes it easy to replace a worn switch in the field without having to send it in for repair.
    Specifications:
    Display:TFT color display (160 x 128 dpi)
    Operating Temperature:0 to 60°C (32 to 140°F)
    External Power:12.0 or 24.0 V power provided via vehicle battery
    Length\Width\Height:26mm(4.96”).5mm(1.83”)mm(1.38”)
    NW:0.105kg (0.23lb),GW: 0.726 kg(1.6lb)
    Accessories:
    1xRugged blow molded case
    1x20ft. extension cable
    1xProbe tip
    1xBattery hookup clips
    1xCigarette lighter adapter
    1xUser's Manual
    Payment
    Delivery details
    Terms of sales
    About us
    Contact us
    Payment
    We accept PayPal payment.
    Please contact us if you need to use another method to pay.
    Payment should be made within
    7 days
    after bidding ends.
    Otherwise a Unpaid Item case will be opened to you.
    Delivery details
    Shipping
    Order will be shipped
    within 1 business
    day after payment confirmed.
    We have warehouse in
    USA

    UK

    HongKong

    Australia

    Russian

    Germany
    and China warehouse.
    From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
    Delivery time varies from 2 to 6 business days.
    From our Hong Kong warehouse via DHL or FedEx Ground
    Delivery time varies from 3 to 5 business days.
    From our China warehouse
    For US buyers,
    we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
    For other countries' buyers,
    we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
    We will ship according to your PayPal address.
    Please make sure it is correct and include phone number for delivery
    .
    If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
    Please include your special requests in eBay note if there is any.
    Terms of sales
    We are authorize distributor, our all items are 100% original and Our devices have warranty,
    12 months free repair for the devices.
    3 months for the accessories.
    Please contact us firstly when you need warranty service.
    In case an item arrives faulty, please contact us in 30 days and keep it unused.
    We will instruct you on how to return and get refund or replacement.
    If after 30 days, or the item has been used, we have the right to decline your claim.
    Items should be returned on buyers' cost for repair or replacement.
    About us
    Who We Are?
    We are specialized dealer of On-Board Diagnostic tools and automotive electronics
    for more than 10 years.
    We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,
    and more brands will be show in our store in near future.
    What Do We Have?
    We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
    We have more than 50 employees devoting to customer satisfaction.
    Terms of tax:
    We are not responsible for buyer's local taxes, please consult your local Customs for tax details.
    Contact us
    Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
    Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
    We will reply in 24 business hours.
    Business time: GMT8 (9:00-18:00) from Monday to Friday.
    Feedback