-40%
Bilstein Dyno Tested S7Z7060 Racing Shock 70-60 gas charged Dirt Modified IMCA 7
Bilstein Dyno Tested S7Z7060 Racing Shock 70-60 gas charged Dirt Modified IMCA 7
Bilstein Dyno Tested S7Z7060 Racing Shock 70-60 gas charged Dirt Modified IMCA 7
Bilstein Dyno Tested S7Z7060 Racing Shock 70-60 gas charged Dirt Modified IMCA 7

Bilstein Dyno Tested S7Z7060 Racing Shock 70-60 gas charged Dirt Modified IMCA 7

$ 36.95

Availability: 100 in stock
  • Returns Accepted: ReturnsNotAccepted
  • California Prop 65 Warning: Per California Prop 65 Law we are required to put the following warning on our listings This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm www.P65Warnings.ca.gov
  • Condition: Dyno tested has minor scuffs
  • Brand: Bilstein

    Description

    Dyno tested
    70-60 Bilstein 7" used Circle Track Racing Shock S7Z7060 (
    as shown in pictures
    )
    Speedway Motors Dyno tested, shock comes with dyno sheets
    70 Rebound Dampening (Out)  6
    0 Compression Dampening (In)
    46mm or 2 in
    .(Big Body),
    Mono-Tube
    (Steel),
    Gas-Charged
    Looks in good condition and
    comes with dyno sheets from S
    peedway Motors
    Outer Finish has typical minor scuffs, scratches and discolored from normal use  (
    please look at pictures
    )
    7 in. of stroke (travel)
    approximate for reference only
    13" compressed
    (center to center)
    14-1/2" overall
    approximate for reference only
    20" extended
    (center to center)
    21-1/2" overall
    approximate for reference only
    1/2" ID bearing end eyelets
    (for Upper and Lower Shock Mounts)
    Coil over compatible
    (grooved for snap ring)
    Bilstein part # S7Z7060
    From a parts buy out of a local Dirt Racing team then Dyno tested
    I'm not an expert, I do my best to give the best information I can find (
    please read complete listing & look at all the pictures
    )
    Any questions please email racecarparts at msn or call 4O2-654-2I88
    To help better understand Bilstein's Numbering System, here is an example: of S9Z-1090=
    "S" = Steel Body (grooved for snap ring)
    "9" = Stroke is inches (a "7"=7"
    stroke)
    "Z" = 46mm (Big Body) 2 in. Diameter
    "10" = Rebound Dampening (Out)
    "90" = Compression Dampening (In)
    IMCA-type Modified's, Outlaw Modified's, Economy Modified's, Late Models, Street Stocks, Stock Cars, circle track racing and other motorsports
    Please ask questions before bidding racecarparts at msn.com or 4O2-654-2I88. we have more shocks listed Please check them out
    L@@K