Bug remove for windshields and grilles of vehicle|Auto detailing insect remover

Description

Ultra-Concentrated Solution. This product can be diluted 8:1 before use. Bugs B Gone still stays effective even after being diluted with water.
This product works great on those "Love Bugs" that can be found in Florida.
Use on the windshield, side rockers,  front end of a vehicle, and side mirrors.
Powerful and safe. Bugs B Gone is so powerful that light scrubbing could be eliminated when using a high-pressure wash.
If light scrubbing is needed, be sure to pair this item with our bug sponge.
Greenway's Bugs B Gone is a heavy-duty bug remover that will quickly remove bug splatters and insects from all of your vehicle's surfaces. Bugs B Gone will quickly remove away those nasty insect splatters and environmental fallouts from the windshield, side rockers, and front end of your vehicle. This product works great on those "Love Bugs" that can be found in Florida. Greenway's Bugs B Gone unique thicker formula is designed to keep Bugs B Gone on the front end, which allows the solution to dissolve and soften the bugs and insects.
Bugs B Gone is fast-acting, which allows you to remove bug splatters and insects without heavy scrubbing, which would induce swirl marks into the paint's finish. Bugs B Gone is powerful yet safe. Scrubbing can usually be eliminated when using Bugs B Gone and a high-pressure wash. Bugs B Gone is also an excellent product to use on your motorcycle or boat.
How to use and dilution guide:
The typical dilution for Greenway's Bugs B Gone is 8:1. Eight parts water to 1 part of the product. We suggest you purchase our
empty 32-ounce dilution bottle
for this product if you are unfamiliar with proper dilution. The product can be diluted less with water if a more potent version has to be made, but we suggest our dilution ratio. Only a couple of ounces are needed to make a ready to use (RTU) 16-ounce bottle of Bugs B Gone. Always add water slowly to avoid excess foam.
Wet the entire area to be cleaned. Always keep the site wet, especially when working in direct sun. Spray each section that needs to be treated with Bugs B Gone. Let the product dwell for approximately 30 seconds to 1 minute before agitation. Agitate area with the appropriate bug sponge or wash mitt and rinse thoroughly.
If you are working in a garage or heavily shaded area, usually the complete area that needs bug removal can be accomplished in one step.  This is because the product will not dry quickly onto the surface to which it is being applied. Spray the entire affected areas and let dwell approximately 30 seconds to 1 minute. Agitate and then rinse areas off from top to bottom.
We like to do our bug removal stage first. Since this step can take some time, we suggest doing your complete bug removal and then proceeding to wash the rest of your vehicle. This can help to avoid water spots and water usage. The areas that usually need treatment are the mirror housings, windshield, and the vehicle's front end.
Tech Tip:
The grille area of the vehicle can sometimes be challenging to clean. Using an incredibly soft brush will get in all the cracks and crevices on the front end. Most detailers neglect to prep the vehicle correctly. The preparation of the exterior surface is the
MOST IMPORTANT
step of the detail.  If you do not prepare the surface accurately for further detailing (E.g., waxing, polishing, compounding, glazing), you will spend much more time trying to remove excess bug residue from cracks and crevices during the “dry” stage of detailing. During the preparation of the “wet” phase of the detailing process, spending more time preparing the vehicle can save SIGNIFICANT time during the final detail stage. Many cracks and crevices on the vehicle's surfaces that contain minor to moderate contamination might be tough to remove with detail sprays and crevice tools at the end of the detail.
Missing the small details at the end of the detail will alarm the customer to inspect many commonly missed areas further. While this is not a negative aspect since the customer is paying for a detailed vehicle, you might overlook some fatigue items after working on the same car for several hours. Working smarter and knowing the proper steps to perform at a professional level comes from experience, research, trial, and error to find the method that works best for your business.
Why choose Greenway’s Car Care Products?
Best customer service.
Highest grade quality auto detailing chemicals made in the USA.
Extensive testing is done on each product for months to ensure capability on each manufacturer's surface.
Step by step instructions will be provided if needed to end user.
We use the safest packaging methods to make sure your item arrives safe.
Product assistance 7 days a week and extended operating hours from 7AM to 7PM EST.
Shipping Information: Products ship FedEx Ground, UPS Ground and USPS to physical US addresses.
Packages typically leave our warehouse the same business day or the next business day.