Cleqee Virtual Digital Handheld Oscilloscope Connect Android&PC 2 Channel

Description

Store category
Sign Up Now !
You may also like
Cleqee Virtual Digital Handheld Oscilloscope Connect Android&PC 2 Channel
Product Description
Country/Region of Manufacture
China
MPN
Does Not Apply
Brand
Cleqee
Oscilloscope Type
Digital Oscilloscope
Number of Channels
2
Warranty
1 Year
AT A GLANCE
Model:
C520
C520M
C520X
C550
Input channels:
2
2
Maximum sampling rate (S/s):
50M
1G
Bandwidth (−3 dB):
20M
50M Hz
FFT:
YES
YES
YES
YES
Data logger:
YES
YES
YES
YES
I/O extension:
YES
YES
YES
NO
Serial bus decoding:
NO
NO
NO
YES
Hardware trigger:
NO
NO
NO
YES
Ext trigger module  support:
NO
NO
NO
YES
Signal generator module  support:
NO
NO
YES
NO
Logic analyzer module  support:
NO
NO
YES
YES
Requirements
C520M
can’t support all kinds of Android devices. Customers may need to check their Android phone/Tablet with these requirements, or check the support list.
Device Operative System
Android API 16+ (Android 4.1)
Device Kind
Phone, Tablet, TV Box
Device Specifications
USB OTG Support, 2GB RAM or more
USB OTG Cable
B type male to micro c , type c or others(depend on your Android device)
USB Oscilloscope
LOTO OSC482M
App Specifications
High Frame Rate
Real-time oscilloscope, up to 500 scans per second and 25 FPS.
Input Range
±250mV to ±5V  (for X1 probe).
±2.5V to ±50V   (for X10 probe).
±25V to ±500V   (for X100 probe).
Sampling Rate
500Sa/s to 48MSa/s.
Memory Length
1024 Samples.
Software trigger
and AC/DC
Improved software trigger with stabilizer. Auto, Normal and Single Trigger modes.AC/DC control.
Full statistics
Peak-Peak, Max, Min, RMS and DC value. Frequency and duty cycle. Cursors for manual calculations.
FFT
Real-time processing with the possibility to select among several windows. Peak detects and Peak-hold functions. Available only for Channel A.
Sinc Interpolator
Sinc interpolator with infinite sampling rate for the best signal view. Maximum visible frequency = Sampling rate / 4.
Phosphor decay effect
Plot multiple signal traces on the screen.
XY Plot
Calculate and visualize difference among 2 signals, amplitude, frequency, phase and delay.
Math functions
Apply operations on single or both channels: invert, +, -, x, :
Probe setting
Direct calculation of current value according the probe setting used (x1, x10).
Data export
data available in .csv and Matlab format.
Calibration
Calibration function available.
Other
Screenshot function.
This is a device list of updates we currently maintain. If you have new device information, please contact us to update.
Support
Not support
Pixel 2 XL
Aquaris E5 FHD
OPPO
A59S
R9S
HM Note 2
LGE V20 (elsa)
VIVO
X9
X20PLUS
Leagoo KIICAA MIX
ZenFone 3 Max
X21
HTC M8
X10
HUAWEI      P20
Samsung S3
ZenFone 3 Zoom
Samsung GT-N5110
M3s
Cat S60
LG G3
Iconia One 8
HP 7.1
Oppo A1601
Fonepad 7
Prestigio PMT3101
GT-810
Transformer Pad (TF103C)
One
Blackview BV8000 Pro
DROID Turbo 2
Asus ZenFone 2
Xperia X
Sony Xperia XZ Premium
Dell  Venue 8
Iconia One 8
HTC One
ZenFone 4 Selfie
Aquaris E5 FHD
HM Note 2
Nexus 7
Galaxy
S Duos2
Lenovo
TAB 10
S4
TAB 2 A10-30
S6 edge+
Tap
Tab S3
TAB3 7 Essential
Tab E 9.6
K5 Note
Tab S2 8.0
HUAWEI
X7
Tab A (2016)
BLN-AL40
S7
NOVA 3I
S7 edge
P8
Note2
P9
Note4
MATE 9
Note8
NOVA 2PLUS
Note9
MATE 10 PRO
Grand Prime
Honor 9
J1 (2016)
Honor 7X
J7
X7
J7 Pro
BLN-AL40
Xcover2
Moto
X (2nd Gen)
A3
Premier
S9
G (5th Gen)
A8 Star
DROID Turbo 2
A9 Pro
Z Play
LG K8
ZenFone 3 Max
LG G4
X10
Nexus 6
Samsung GT-N5110
Acer B1-820
Xperia Z3
Xperia X Compact
ZenFone 3 Zoom
Fonepad 7
M3s
OnePlus5T
LG G3
Le Max2
HP 7.1
GT-810
K5 Plus
One
HTC One
ZenFone 2
DROID Turbo 2
VIBE K6 Note
Nexus 7
KEYone
Xperia X
7 Voyager
Dell Venue 8
xiaomi
mix
A2 Lite
Redmi
Note 4
4X
5 Plus
Note 5 Pro
4 Pro
4X
Note 2
S2
3S
SHARP
AQUOS S2
Configuring Outputs
Select the IO pin that needs to be used as output and select the corresponding check box OUTPUT, select the output level HIGH or LOW for changing the pin state.
Configuring Inputs
IO pins can be set to to receive TTL levels, by selecting the check box INPUT. By clicking on the refresh button you can get the input level. High level is displayed as a green icon with ‘H’ in the middle, low level is displayed as a gray small icon with ‘L’.
Paperless recorder
This chapter introduces the basic concepts and usage of the paperless recorder, a software functional extension of the virtual oscilloscope hardware.
11.1 Basic Concepts of Paperless Recorders
A paperless recorder is a data logger or data acquisition device used to record measurement data over time. A paperless recorder based on virtual oscilloscope hardware has the ability to record the collected or computed data in a storage system inside the software on a time basis, without consuming any paper, pen or ink. Common collected data are voltage, current, etc.
Introduction to Paperless Recorder Software
Common software interface
The Recorder software has an interface consistent with the oscilloscope software, so to be familiar to the user.
Equipment monitoring
After the software interface is opened, the OSC2002 device status will be monitored in real time. When the hardware device is connected to the USB port of the PC, the software interface will display a blue background and a message.
If the hardware get disconnected or the software have no access to the device, then the display background will become yellow, showing a text alert.
Note
The paperless recorder software has exclusive access to the OSC2002 device. Therefore, the device can be used just with one software at a time.
Set the Total Record Duration
This panel allow to set the recording duration; it can be set in the range 1 minute ~ 3 days.
Set the Sampling Interval
This panel allow to set the sampling interval
from 1 second to 1 hour.
Note
The sampling interval cannot be greater than the total
recording duration, otherwise it is meaningless.
Start and Stop
After the driver has been successfully installed, if the oscilloscope is connected when the software is opened, the software automatically turns on the device. If the device is connected before opening the software, it is required to start the device manually by clicking on the Start Device button in the lower right corner of the
software.
The acquisition can be stopped by clicking the stop button. The Start and Stop button are actually the same button that change according the status of the oscilloscope. When the USB cable is suddenly unplugged during the operations, the software will automatically stop.
When the device is not used it is recommended to close the software and then
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We only accept the Paypal payment.Other payments are not acceptable!
2. If we couldn't receive your payments within 2 business days,we reserve the right to sell to another buyer.
Delivery details
1.We ship out the products within 2 business day when you purchase during Monday to Friday. If you order during weekends, we will arrange the shipment on next Monday.
2. For United States, we ship out the parcel via Standard SpeedPak when the price is higher than . Orders less than , we will send China Post(economy shipping). For other countries,we will use the suitable shipping methods.
Sometimes the shippment will have a delay or lost. Please feel free to contect us and we will send you a full refund to make up for your loss. Please don't leave us a negative feedback. Thanks for your kind understanding.
Terms of sales
1.We only ship to the confirmed address. Please be sure to confirm your address information before placing orders.
2.If you need the faster shipping, please contect us.
3.If you couldn't accept the delivery time, please don't place the order.
About us
Changzhou Le Qi Electronic Technology Co., Ltd. is a company specializing in instrumentation, testing accessories production company, has a number of independent R & D products, and received unanimous approval of customers. Production plant covers an area of more than 3000 square meters, plant more than 2000 square meters. With SMT automation production line, high-speed precision injection molding machine, lathes, punching machines, mechanical and other sets of hand, a variety of more than 100 sets of in use mold. The company has 3G high-frequency signal source, 1.5G digital oscilloscope, 3G pulse signal generator, 50KV high voltage test equipment, tensile bending tester and other instruments and equipment to meet the product performance indicators. Tel: +86-0519-83621698.
Contact us
Working time:
Monday to Friday
8:30-17:30
Feedback