KM10 12V 24V Power Probe Automotive Circuit Tester Powerscan Diagnostic Tool

Description

M10 Product Description:
The
KZYEE KM10
power scan kit is the most revolutionary circuit tester to date,
featuring AVOmeter, test light , built -in flashlight , short circuit indicator , relay/component tester , continuity tester and bad groud indicator
, the power scan is truly the ultimate in power and affordablity , allowing users to check circuitry in one single step . an absolute must for every technician looking for a fast and accurate solution to electrical systems diagnostics.
Power Probe Functions:
1. Perform these functions: power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
2. Read the AVO meter, voltage, current, and resistance easily.
3. Press the power switch lightly and get the instant heat ground lead to energize the electrical components, such as the cooling fan, relay etc.
4. Activate the components by using the hot wire and ground lead simultaneously.
5. Determine the positive, negative and open circuit quickly.
6. Test the bad ground contacts quickly, follow and locate short circuits without wasting the fuse.
7. Test the continuity of the power switch, relay and diode quickly.
8. Protect the tool from overload through the inner circuit breaker.
9.Operate the tool without looking at the menu once users are familiar with the tone. Test along the vehicle by the long cable.
KM10 Electrical System Circuit Tester Features:
1. Easy to read AV0 meter allows you to read voltage, current and resistance at the fingertip.
2. With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
3. Simultaneously uses the hot lead and the found lead to activate components right in your hand.
4. Instantly identifies positive, negative and open circuits.
5. Circuit breaker protected.
6. Bulit-in flashlight enables you to work in the dark.
7. 20ft(extendable)cable provides excellent accesssiblity to test along the vehicle.
8. Extremely easy to use and highly reliable.
9. KM10 PowerScan Electrical System Diagnostics Circuit Tester is used as Power Probe for testing vehicle electrical circuit
.
Working mode:
There are four modes to diagnose the electrical systems, which can be accessed by pressing the Model Button and cycling through each one.
DC Voltage
AC Voltage
Resistance
Diode
.
Voltage & Polarity Testing
:
Circuit Continuity Testing in Resistance Mode
While the tool is in Resistance mode with the probe tip with chases being ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle's electrical system, when the probe is contacting a ground, the LCD will display "0.0Ω" And green LED will be on, A beep will sound
.
Activate Components in Your Hand
:
Activate Components in The Vehicle Het
:
Testing Trailer Lights and Connections
:
Signal Circuit Testing:
For example, you suspect there is a problem with your M.A.P? sensor circuit, please follow the procedure involved with testing this sensor.
* Set the tool in AC Voltage mode, using the probe tip with chassis ground or the auxiliary ground lead.
* Connect vacuum pump to MAP sensor
* Connect the probe tip to the MAP sensor,
positive terminal and observe the LCD readings which should be a sine wave in normal condition,
* Apply vacuum
* Release vacuum and observe the LCD readings
.
Activate Components W/Ground
Product Image
Power Probe Specifications:
Display: TFT color display (160x128 dpi)
Operating Temperature: 0 to 60C (32 to 140F)
External Power: 12.0 or 24.0 V power supplied from vehicle battery
Package List:
1 * Power Scan
1 * Robust Plastic Case
1*20ft. extension cable
1 * Probe Tip
1 * Battery Connection Clips
1 * Cigarette Lighter Adapter
1 * User Manual