KZYEE KM10 Circuit Tester PowerScan Electrical System Diagnostic Tool 12V& 24V

Description

KZYEE KM10 Circuit Tester PowerScan Electrical System Diagnostic Tool 12V& 24V
KM10 Car Circuit Tester Basic Description
---Kzyee KM10 super electrical probe diagnostic tool supports 12V and 24V electrical systems.
---Built-in voltage & polarity, continuity, Trailer Lights and Connections as well as signal circuit testing. it can quickly and accurately find trouble spot.
---Activating components in the vehicle or W/Ground, reading voltage display red/green polarity LED, tracing ,locating short circuits, bad ground contacts.
KM10 Circuit Tester Key Features
1.Highly reliable and extremely easy to use with 6m long strong cable
2.Built-in flashlight enables you to work in the dark
3.LED screen allows you to read voltage, current and resistance at the fingertip
4.With 6 Meter long electronic cable, convenient to test from the front to the rear of the car
5.Test mode contain AV Voltage, DC Voltage, Current Resistance, LED, including most car circuit test system
6.Including Cigarette Lighter adapter, battery test clips, easy to get battery supply from the car
7.Circuit Breaker Protection: Ability to Power Up Components. Automatically shut-off if current exceeds 5 Amperes, it design to protect an electrical circuit from damage caused by over-current, typically resulting from an overload or short circuit.
Warm Note:
This probe is very sharp on the pointed end, easily to get hurt. Better to be more careful when performing
KM10 Functions
1. Perform these functions: power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
2. Read the AVO meter, voltage, current, and resistance easily.
3. Press the power switch lightly and get the instant heat ground lead to energize the electrical components, such as the cooling fan, relay etc.
4. Activate the components by using the hot wire and ground lead simultaneously.
5. Determine the positive, negative and open circuit quickly.
6. Test the bad ground contacts quickly, follow and locate short circuits without wasting the fuse.
7. Test the continuity of the power switch, relay and diode quickly.
8. Protect the tool from overload through the inner circuit breaker.
9. Allow you to work in the dark area by using the built-in head light.
10. Operate the tool without looking at the menu once users are familiar with the tone. Test along the vehicle by the long cable.
Work mode
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Model Button and cycling through each one. DC Voltage AC Voltage Resistance Diode
Voltage&Polarity Testing
Circuit Continuity Testing in Resistance mode
While the tool is in Resistance mode , using the probe tip with chases is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle's electrical system, When the probe tip is contacting a ground, the LCD will indicate "0.0Ω" and green LED will be on , A beep tone will sound.
Activating Components in Your Hand
Activating Components in The Vehicle
Testing Trailer Lights and Connections
Signal Circuit Testing
For example , you suspect there is a problem with your M.A.P ?
sensor circuit, then follow the procedure involved with testing this sensor.
*Set the tool in AC Voltage mode, using the probe tip with chassis ground or the auxiliary ground lead.
*Connect vacuum pump to MAP sensor
*Connect the probe tip to the MAP sensor , Positive terminal and observe the LCD readings which should be a sine wave in normal condition,
*Apply vacuum *Release vacuum and observe the LCD readings
Activating Components W/Ground
Product Image
Specifications
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60C (32 to 140F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Package List
1 * PowerScan
1 * Rugged Blow Molded Case
1 * 20ft. Extension Cable
1 * Probe Tip
1 * Battery Hookup Clips
1 * Cigarette Lighter Adapter
1 * User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1.We accept payment by PayPal only !
2.Payment should be completed Within 8 days after buyer places the order, or else an ebay Unpaid Case will be opened .
3.If you Can Not Pay in time or Don't Want to Buy this product any more , please Cancel the transaction Before the Unpaid Case is Opened.
Delivery details
1.All of the items will be shipped to buyer's EBAY address,please confirm your address on Ebay before you buy.
2.Your order will be usually shipped out the same or next business days once the payment is made and cleared, except on weekends and holidays.
3.Most of products are checked and tested carefully before shipment.Well Packed protects your items with suitable material so as to avoid damage during transit.
4. If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!
Terms of sales
1. We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory
2.It's the buyer's responsibility to complete clearance when parcel reached your Customs.
3.We are not responsible for buyers's local taxes, please consult local Customs for Tax Details.
About us
We are eager to be your professional parner of automobile diagnostic tool.
We support remote assistance by Teamviewer if you have any difficulty in software installation.
Contact us
1. We are committed to providing customers with the best products and services
，
Please do not hesitate to leave us your positive feedback if you are satisfaction with our products ,delivery or services .
2. If you have Any Questions, Please do not hesitate to Contact Us by email/ ebay message. We will reply you within 12 hours and do our best solve the problem with you
（
Except on Weekends and Holidays
）
.
3.Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .