KZYEE KM10 KM50 12V 24V Car Power Probe Circuit Tester Electrical Circuit Tool

Description

Store category
Sign Up Now !
You may also like
KZYEE KM10 KM50 12V 24V Car Power Probe Circuit Tester Electrical Circuit Tool
Product Description
KM10 Description :
the KM10 power scan kit is the most revolutionary circuit tester to date, featuring AVOmeter, test light , built -in flashlight , short circuit indicator , relay/component tester , continuity tester and bad groud indicator , the power scan is truly the ultimate in power and affordablity , allowing users to check circuitry in one single step . an absolute must for every technician looking for a fast and accurate solution to electrical systems diagnostics.
KM10 Electrical System Circuit Tester Features:
*
Easy to read AV0 meter allows you to read voltage, current and resistance at the fingertip.
*
With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
*
Simultaneously uses the hot lead and the found lead to activate components right in your hand.
*
Instantly identifies positive, negative and open circuits.
*
Circuit breaker protected.
*
Bulit-in flashlight enables you to work in the dark.
*
Audio tone indicator allows for no-look menu scrolling once user are familiar with menu tone assignment.
*
20ft(extendable)cable provides excellent accesssiblity to test along the vehicle.
*
Extremely easy to use and highly reliable
*
KM10
PowerScan Electrical System Diagnostics Circuit Tester is used as Power Probe for testing vehicle electrical circuit
Km10 Work Mode
DC Voltage, AC Voltage, Resistance, Diode
Km10 Function:
1. The Ultimate in Circuit Testing
2. KM10 Circuit tester with the ability to supply Power or Ground with an indicator tone and bright-white LED headlamps.
3. Features Digital Voltmeter, Min/Max, Audible Circuit Monitoring, 4mm Standard Banana Jack and Auxiliary Ground for component testing.
4. Includes Case and extension Lead cable for 12 Volt Power Port Adapter. Works with 12V - 24V DC Systems.
KM10 Electrical System Circuit Tester Specifications:
*
Display: TFT color display (160*128dpi)
*
Operating Temperature: 0 to 60 (32 to 140)
*
External Power: 12 or 24V DC power provided via vehicle battery
KM10 Electrical System Circuit Tester
Package Including:
1pc x KM10 main unit
1pc x User manual
1pc x Cigarette lighter adapter
1pc x Battery hookup clips
1pc x Probe tip
1pc x E
xtension cable
1pc x Rugged blow molded case
KM50 Description :
The
KZYEE KM50 Power Scan kit
is the most revolutionary circuit tester to date, which works off of
12-24 Volt
sources, featuring
DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit Detection, Resistance, and Diode
Especially, in
AC Voltage, Frequency, Duty Cycle,
and
Fuel Inject Modes
, users can long-press the mode button to switch between
Waveform Display Mode
and
Digital Display Mode
. The power scan is indeed the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostic.
TIPS:
1.KM50 is ONLY for
12-24V
vehicle battery electrical systems, and should
NOT
be used to test
110/220V
household electric appliances; or, it will be damaged.
2. The LED and LCD pull no more than
100 milliamps
of current, therefore when using this device as a test light or multimeter, it is safe for computers and airbags.
3.When powering-up components, you can increase the life of rocker switch in the tool if you first press the switch, and then contact the tip to the component. The arcing will take place at the tip instead of the metal contacts of the rocker switch.
KM50 Activating Components
In Your Hand or In The Vehicle
With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand.
What’s new in KM50 Circuit Tester Kit?
New Testing mode: Fuel Inject Mode.
New Testing mode: Frequency Mode.
New Testing mode:Duty Cycle Mode
.
Digital & waveform displays in 4 testing modes.
More diagnostis informations in each testing modes
Short-circuit protected
Buzzer is swichable.
LED light is switchable.
KM50 Product Specifications
Supply Voltage: 8V DC ~ 30V DC；Frequency: 0Hz ~ 1Mhz
DC/ AC Voltage Test: -110V ~ 110V
Duty Cycle: 0.0~100.0%；Rating Current: 1A~8 A
Fuel Injection:Voltage: 0~180V, Time: 0~25ms
KM50 Support 7 Diagnoses Mode:
Fuel Inject Mode:
Fuel Inject Mode is specifically set-up for fast and easy injector circuit diagnosis. One quick connection to the circuit and the KM50 will display all the needed fuel injector testing information.To reset the maximum and minimum values, press the mode button twice. In this mode, if it fails to detect a valid injection pulse, a bar symbol will display instead.
Frequency Mode
Press mode button to enter the menu and short short press the down button to place the cursor in the frequency mode, and short press the mode button to enter the frequency waveform display mode.The LCD display will show the min frequency, max frequency and display the signal waveform in real time.
Duty Cycle Mode
Press mode button to enter the menu andshort press the down button to place the cursor in the Duty Cycle mode, and press the mode button to switch it to waveform display. The LCD display will show the min duty cycle, max duty cycle, and display the signal waveform in real time.
DC Voltage Mode
DC mode is for testing DC (direct current) voltages. Voltage testing is as easy as contacting the probe tip to a circuit and reading the display. DC Mode is the mode that the KM50 can supply battery power or ground by pressing the rocker switch.
AC Voltage Mode
The auxiliary ground wire is connected to one end of the circuit under test, and the probe contacts the other end of the test circuit. The LCD will display the max and mini voltage value, and display the signal waveform in real-time. You can adjust the sampling frequency by pressing the Up/Down Button.
Resistance Testing Mode
The probe contacts one end of the measured resistance, and the auxiliary ground lead is connected to the other end of the measured resistance. The LCD will display the resistance between the tip and auxiliary ground lead.When resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light. This function can be used as continuity test.
Diode Testing Mode
Contact the probe tip to diode positive terminal, connect the auxiliary ground lead to the diode negative terminal, the screen will display the forward voltage drop, which indicates forward bias. If swapping the probe tip with auxiliary ground lead, the screen will not display voltage, which indicates reverse bias.
It also displays the max and mini values during measurement.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept paypal only.
Please Note
Import duties,taxes and charges are not included in the item price or shipping charges
(US customers do not need to pay import duties).
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample.
In general, no custom duties and tax will be charged.
Delivery details
Shipping
Order will be shipped
within 1 business
day after payment confirmed.
We have warehouse in
USA，UK，HongKong，Australia，Russian，Germany
and
China
warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our HongKong warehouse
via e-Packet
For US buyers,
we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers,
we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery
.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any
Terms of sales
Return Policy
Please return the item within
60 days
after receiving if you are not happy with your purchasing.All returns are expected to
be in original conditions, please email us first for return address and instructions.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
3 Year free repair for the devices.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
About us
Who We Are?
We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in US and
Australia
to ensure fast shipment and after-sale service.
We have more than 100 employees devoting to customer satisfaction.
Contact us
1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.
2: our
business time:
M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
3:Please leave us
Positive Feedback
and
5-stars
★★★★★
after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.