Kzyee KM50 PowerScan Electrical Power Probe 12V/24V AVOmeter Circuit Tester Tool

Description

Product Description
Product Description
The KZYEE KM50 Power Scan Kit is the most revolutionary circuit tester to date, working with 12-24 volt sources and providing DC voltage, AC voltage, Frequency, Duty Cycle, Injector Circuit, Resistor and Diode detection functions. Specifically in AC voltage, Frequency, Duty Cycle and Inject mode, the user can switch between
waveform display mode
and
digital display mode
by long pressing the mode button. The Power Scan is indeed the ultimate in performance and affordability, allowing the user to check circuits in a single step. An absolute must for any technician looking for a fast and accurate solution for diagnosing electrical systems.
TIPS:
1. KM50 is ONLY for
12-24V
vehicle battery electrical systems, and should
NOT
be used to test
110/220V
household appliances or it will be damaged.
2. The LED and LCD draw no more than
100 milliamps
of current. So if you use this device as a test light or multimeter, it is safe for computers and airbags.
3. When turning on components, you can extend the life of rocker switch in the tool if you first press the switch, and then apply the tip to the component. The arc will then occur at the tip and not at the metal contacts of the rocker switch.
Activating Components
In Your Hand or In The Vehicle
With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters,wipers, etc. Use the hot lead and ground wire at the same time to activate elements directly in your hand.
Product Specifications
Supply Voltage: 8V DC ~ 30V DC；Frequency: 0Hz ~ 1Mhz
DC/ AC Voltage Test: -110V ~ 110V
Duty Cycle: 0.0~100.0%；Rating Current: 1A~8 A
Fuel Injection:Voltage: 0~180V, Time: 0~25ms
What’s new in KM50 Circuit Tester Kit?
(NEW)Fuel Inject Mode
(NEW)Frequency Mode
(NEW)Duty Cycle Mode
Digital & waveform displays in 4 test modes
More diagnostis informations in each test modes
Short-circuit protected
Buzzer is swichable
LED light is switchable
KM50 has more highlights than other circuit testers.
Resistance Test:
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
Diode Test:
In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reverse bias.
Signal Circuit Testing:
Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.
Testing Trailer Lights and Connections:
While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground , probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.
Red/Green Polarity LED:
The Red/Green Polarity LED lights up when the probe tip voltage matches the battery voltage within ±0.4 volts. It is added information that could be valuable to the technician.
Auto Circuit Breaker:
The tool is short-circuit protected. Its internal circuit breaker will trip if it becomes overload. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload.
NEW FEATURES
More Advance Features to Do Circuit Test
Fuel Inject Mode:
There are a variety of currently used techniques and tools that can test a fuel injector or injector circuitry; however it usually involves using multiple tools and tests to check every aspect of the injector circuit. Complete testing could take quite a bit of time.
Fuel Inject Mode is specifically set up for quick and easy diagnosis of the fuel injection circuit. A quick connection to the circuit and the KM50 will display all the information needed to test the injectors. To reset the maximum and minimum values, press the mode button twice.
If no valid injector pulse is detected in this mode, a bar icon will be displayed instead.
Frequency and Duty Cycle Mode:
The car's electronic control system communicates with various sensors via digital signals. When the car fails, you need to use the instrument to check whether the frequency of the signal or the duty cycle is abnormal.
Press the Mode button to enter the menu, and press the Down button momentarily to place the cursor in the frequency mode, and press the Mode button momentarily to enter the frequency waveform display mode.
Press the Mode button to enter the menu, and press the Down button momentarily to place the cursor in the Duty Cycle mode, and press the Mode button to switch to the waveform display.
Buzzer and LED light are Switchable:
When you measure the voltage DC, if the voltage is 0V, the green indicator light will be on and the buzzer will sound twice; if the voltage is above 5V, the red indicator light will be on and the buzzer will sound once. When the resistance value is less than 30Ω, the buzzer of the device sounds and the green indicator LED lights up.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
Paypal is
only
payment
we accept .
your
package
will be out within 1 business day
after
payment cleared.
Delivery details
1. Shipping terms:
UPS GROUND SERVICE / USPS First Class Mail Tracked Service / USPS Priority Mail
Parcels
Tracked
Service
2. Shipping address supplied by Paypal is acceptable.
3. After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend) by int'l Express or registered air mail
4.
If
your package delayed
few
days,
due to any unexpected factor
,
please wait patiently
. your kind
understanding would be highly appreciated!
Terms of sales
Please do not hesitate to leave us your posit
ive feedback
if you are happy with your shopping. if you are unsatisfied
with your
purchase, just contacting us wil
l
perfect solution for you.
About us
We are eager to be your professional parner of automobile diagnostic tool.
We support rem
ote assistance b
y
teamviewer
if you have any
difficulty in software installation.
Contact us
1.we are striving for positive feedback
with
five star
2.if you have any questions, please feel free to contact us by  ebay message
3.business time:GMT8(9:00am-22:00pm) monday to saturday