Power Probe PP3EZGRNAS Power Probe 3EZ with Case & Accessories - Green

Description

Power Probe PP3EZGRNAS Power Probe 3EZ with Case & Accessories - Green
Easy Learning
– Teaches a new user how to use the functions in the tool.
Easy Diagnostics
– Guides a user through simple tests such as Battery Testing, Charging System Testing, Fuse Testing, and Voltage Checks. Simply scan the QR Code with your Smart Device, which will link to a video to guide the user to perform these tests.
The easy to read LCD display –
Provides easy to see readings with a simple navigation menu to get to what you need fast.
Upside Down? No Problem!
With a new flip screen feature, you can see screen readings while holding the tool upside down.
Safety First.
The 8 amp thermal circuit breaker provides protection while powering up components, relays or circuits while still allowing inrush current for larger draw components.
It’s Menu Driven.
The PP3EZ has a menu driven screen that makes navigating a breeze for easier diagnosing of electrical issues.
This is an essential electrical tool.
The PP3EZ is an all-in-one tool with DC Voltmeter, MIN, MAX, and Peak to Peak mode, along with audio signal capability (AC Threshold).
Storage temperature/humidity: -20 to 70 °C, 70% RH max
Operating temperature/humidity: -10 to 50 °C, 70%RH max
Pollution degree:2
Voltage & Polarity testing
Continuity testing
Activating components out of the vehicle’s electrical system
Activating electrical components in the Vehicle
Activating electrical components with ground
Testing trailer lights and connections
Checking for bad ground contacts
Red/Green Indicator & Audio Tone
DC 0 to +70V +1 Digit
P-P 0 to +70V
The frequency response for tone pass through
10Hz to 10kHz
PP Display
15 Hz Square Wave
35 Hz Sine Wave
Power Probe Mode – Continuity to ground
First level – Display is enabled less than 20 K Ω
Second level – Green LED is enabled less than approx. 600 Ω
– & +Peak Detector Response
Single event capture less than 200ms pulse width
Repetitive events less than 1ms pulse width
Peak to Peak Mode
0 to + 70 + 1 Digit
4Hz to over 500kHz Square Wave input
4Hz to over 250kHz Sine Wave input
The threshold for PPAC/Audible passthrough
OverVolt Warning!!
If the probe tip connects to a voltage greater than +70 Volts the display will show an “Over Volt” warning. Remove the probe tip immediately to prevent internal damage to the tool.
Over Load Warning
If the probe is connected to a battery with a voltage greater than 34 VDC the display will show an “Over Load” warning.
Circuit Breaker
8 amp thermal response – Manual reset
Typical Response
8 amps          10amps      15amps     25amps    Short Circuit
No Trip          20min       6 sec.         2 sec.        0.3 sec.
The PP3EZAS Kit includes:
Power Probe 3EZ
Optional 20ft Extension Lead (with AS Kit) for a total of 40ft. (Perfect for working on large trucks or trailers)
Optional Cigarette Lighter Adapter (with AS Kit)
Battery Clip-Set (for connecting to vehicle battery)
Convenient Carrying Case