Power Probe PPECT3000 Circuit Tracer & Short Finder, 12-24 Volt Systems

Description

The PPECT3000 allows you to trace short circuits with a directional indication, trace short circuits with distance indication, trace open circuits with LED indication and work on 12-24 volt systems.
Trace Out a Short Circuit to Chassis Ground
Tracing Out a Battery Drain or Current Draw
Isolate your Circuit
Verify the Short Circuit to Ground
Verify an Open Circuit
Short Circuit inside a wire harness
Reception Distance from 1 inch to 8 inches
Tracing Circuits that are shielded (Plastic Panels, Pillars, and Carpet)
Shut off time is now 10 mins
SPECIFICATIONS
Transmitter:
Min Operating Voltage 8 VDC
Max Operating Voltage 48 VDC
Working Current: 200mA
Working Frequency: 4KHz
Max Operating Relative humidity: 80% ( Non-condensation)
Max Storage Relative humidity: 80 % (Non-condensation)
Receiver:
Power Supply: 2 x 1.5V AAA
Working Current: When not signal be detected <15mA
Power Consumption when power off:<10uA
Max Operating Temp: 50°C
Max Storage Temp: 70° C
Max Operating Relative humidity: 80% (Non-condensation)
Max Storage Relative humidity: 80% (Non-condensation)
The PPECT3000 Kit Includes:
(3) light bulb socket adapters for testing lighting systems
(1) universal adapter
(1) blade probe adapter for tapping into fuse terminals
(1) back probe adapter for back probing connectors
(1) piercing probe
(1) lead with an alligator clip for connecting to a wire or terminal
(1) blow molded case
(2) AAA Batteries